This product is a system that dries high-content moisture in sludge generated in wastewater treatment plants at a low moisture content of 40 to 50%, targeting dehydrated cakes of organic and inorganic sludge, and an ejector injection system that can smoothly inject cakes dehydrated in filter press dehydrators into drying facilities without power and a low-energy consumption cyclone drying system using low-temperature adiabatic compressed air. It consists of a high-efficiency separation system that improves the separation and recovery efficiency of buildings and an HMI automatic operation control system that improves the convenience and stability of facility operation.

 

- In particular, water sludge and inorganic sludge low water content (less than 70%) cakes are difficult to continuously inject into existing drying facilities, so most of them are not directly buried and recycled



① Improve the marginal water content of the dehydrator in the water treatment process and obtain a low water content of <40%

② No secondary air pollutants (NOx, SOx, VOC) using only power.

- eco-friendly low-temperature drying technology

③ Low energy consumption type drying technology using BLOWER's adiabatic compressed air.

④ Ejector injection system with smooth continuous sludge injection without power.

⑤ Secure operation convenience due to PLC control and HMI automation.



- This product expands the drying area by continuously injecting wastewater sludge as well as filter press dehydration CAKE with low moisture content without power, lowering the inflow sludge with high water content to a low water content drying sludge, and operating the energy consumption at 636 kcal/kg-water level, which is 80% lower than the existing hot air kill dry energy consumption (816 kcal/kg-water), and has excellent energy efficiency.