Application Method

• Thoroughly remove any contaminants (e.g., laitance, water stains, or other impurities) from the surface.

• If the surface is aged and generating dust or loose particles, apply substrate hardener (CMW-8) first.

• For areas with water pooling or removed substrate, adjust the slope using a mixture of CMW-8 and remital.

• Repair cracks or joints on the surface using crack repair agent (CMW-7B) or other suitable sealing materials.

• In a suitable mixing container, pour the liquid waterproofing agent first, then add the powder waterproofing agent, and mix thoroughly.

• Depending on the surface, apply 2–3 coats using a brush or roller.
  (Ensure each coat is fully dried before applying the next.)

• Drying time per coat: approximately 10 minutes to 4 hours, depending on ambient conditions and work environment.